Main header start position=%lli
// Clip the start previous dash to the start of the circle
// The start of the dash we're considering may be clipped by the start of the
angleFromStart = mod(angleFromStart,
6.28318530718)
half angleFromStart = atan(circleEdge.y,
circleEdge.x) - dashParams.z
if (angleFromStart - x + dashParams.y >
= 6.28318530718) {
if (angleFromStart - x - dashParams.y <
-0.01) {
(+ %.1f ms in %d steps since start of marking,
biggest step %.1f ms,
walltime since start of marking %.f ms)
-- error
-- error want read
-- error want write
CWelsH264SVCEncoder::SetOption enable SSEI = %d -- this is not supported yet
bytes failed with error
due to error
error return
cleaning up
expected to start with
failed with error
previous ack block start is
sqlite error
start bitrate
# Fatal error in %s
# Fatal error in %s,
line %d
# Fatal error in:
#error No
'(' required to start ATTLIST enumeration
'),
or a nonce ('nonce-...') is required to enable inline execution.
(failed to get error message)
) must be greater than the start value provided (
,
ALR start bandwidth usage percent:
,
SSL error code
,
error =
,
error code:
,
net_error
<
- error from previous GL command
<
no error message>
-- Prologue: check code start register --
109 Japanese Keyboard with One-touch start buttons
: Applying STUN_ATTR_NONCE attribute in try alternate error response.
: Applying STUN_ATTR_REALM attribute in try alternate error response.
: Connection closed with error
: Couldn't start DTLS handshake
: Missing STUN_ATTR_ALTERNATE_SERVER attribute in try alternate error response
: Port encountered error while gathering candidates.
: Received STUN binding error without a error code from
: Received STUN error response id=
: Received STUN error response,
code=
: Received TURN allocate error response,
id=
: Received TURN channel bind error response,
id=
: Received TURN create permission error response,
id=
: Received TURN refresh error response,
id=
: StunPort: stun host lookup received error
: TURN host lookup received error
?? Unknown error ??
A network error occurred.
A stream must start with a complete key frame
A transfer error has occurred.
API fatal error handler returned after process out of memory
Abort decoding on minor error detection
Address <
start || address >
= end
Allocate error response: code=
An unexpected error occurred.
An unknown NFC error has occurred.
An unknown error occured while reading cookie change subscriptions.
An unknown error occured while subscribing to cookie changes.
An unknown error occured while writing the cookie.
An unknown error occurred while talking to the credential manager.
An unknown error occurred within Service Worker.
Application Cache Error event: %s
Association error counter exceeded
Attribute list declaration doesn't start and stop in the same entity
Audio error during flushing,
status:
Audio error during playing,
status:
BAD ERROR CODE
BError parsing a meta element's content: '
' is not a valid key-value pair separator. Please use ',
' instead.
BWE Setting start bitrate to:
Binding error response: class=
Body stream has suffered a fatal error and cannot be inspected
BtreeInitPage() returns error code %d
CAPI fatal error handler returned after process out of memory on the background thread
CHLOCan not write connection close frame error code
CWelsH264SVCEncoder::SetOption enable LTR = %d,
ltrnum = %d
Callbacks::Error deserializer
Can not write application close frame error code
Can not write application error code
Can only enable virtual time for pages,
not workers
Can't read 4 bytes at start of cmap format 4 subtable
Can't read start of cmap subtable
Cannot call start more than once.
Cannot start a transaction within a transaction
Chrome was unable to initialize icon.
Comfort noise generator returned error code:
Comment doesn't start and stop in the same entity
Contains the invalid name-start character '
Content error in the external subset
ContinueSSL -- error
Cookie domain cannot start with .
Could not start audio source
Could not start video source
Couldn't find end of Start Tag %s
Couldn't find end of Start Tag %s line %d
Critical error found
Current() : internal error tctxt == NULL
Custom property names must start with '--'.
DOM Error while querying
Data_start = 0x%08I64x
Decoder error (no error code)
Decoder returned error code:
Decoding error occurred.
Decompression error in IDAT
Define Restart Interval %u
Detected an error in element content
Detected big bandwidth drop,
start probing.
Device::Start deserializer
Divide by zero error during constant folding
Document() : internal error tctxt == NULL
EGL display query failed with error
EglBindApi failed with error
EglChooseConfig failed with error
EglCreateContext failed with error
EglCreatePbufferSurface failed with error
EglCreateWindowSurface failed with error
EglDestroyContext failed with error
EglDestroySurface failed with error
EglGetConfigAttrib failed with error
EglSwapInterval failed with error
Element content declaration doesn't start and stop in the same entity
Element declaration doesn't start and stop in the same entity
Element-available() : internal error tctxt == NULL
Enable Cable
Enable Intl.Locale (in progress)
Enable Intl.RelativeTimeFormat (in progress)
Enable Liftoff,
the baseline compiler for WebAssembly
Enable RTP MP4A-LATM payload
Enable ThinString support
Enable actual asynchronous compilation for WebAssembly.compile
Enable all completed harmony features
Enable all shipped harmony features
Enable code compiled in via v8_experimental_extra_library_files
Enable compilation cache
Enable compiler dispatcher
Enable debugging the simulator
Enable error resilience on damaged frames (unsafe)
Enable escape analysis
Enable external track support.
Enable flushing of the I/O context after each packet
Enable function context specialization in TurboFan
Enable harmony
Enable inline flags in regexp.
Enable inlining in TurboFan
Enable instruction scheduling in TurboFan
Enable jump threading in TurboFan
Enable lazy compilation for all wasm modules
Enable lazy compilation for asm-wasm modules
Enable lazy parsing inner functions
Enable load elimination in TurboFan
Enable low-level linux profiler.
Enable mitigations for executing untrusted code
Enable moving of object starts
Enable new csa-based experimental builtins
Enable non-trapping float-to-int conversions for wasm
Enable optimization for specific cpu
Enable parsing on background
Enable perf linux profiler (basic support).
Enable perf linux profiler (experimental annotate support).
Enable predictable mode
Enable profiling in TurboFan
Enable prototype anyref support for wasm
Enable prototype exception handling opcodes for wasm
Enable prototype import/export mutable global support for wasm
Enable prototype multi-value support for wasm
Enable prototype sign extension opcodes for wasm
Enable prototype simd opcodes for wasm
Enable prototype threads for wasm
Enable store-store elimination in TurboFan
Enable support for tracking retaining path
Enable test-worthy harmony features (for internal use only)
Enable unaligned accesses for the regexp engine
Enable unwinding info for perf linux profiler (experimental).
Enable use of AVX instructions if available
Enable use of BMI1 instructions if available
Enable use of BMI2 instructions if available
Enable use of FMA3 instructions if available
Enable use of LZCNT instruction if available
Enable use of POPCNT instruction if available
Enable use of SAHF instruction if available (X64 only)
Enable use of SSE3 instructions if available
Enable use of SSE4.1 instructions if available
Enable use of SSSE3 instructions if available
Enable use of constant pools for double immediate (ARM only)
Enable wasm baseline compilation and tier up to the optimizing compiler
Enable wasm optimization
Encode failed (error code
Encountered pipeline error while suspending:
Entity declaration doesn't start and stop in the same entity
Error %d reading from socket.
Error (0x%lX) while retrieving error. (0x%lX)
Error :
Error =
Error allocating temporary storage for tim sort: need %lu bytes
Error at index %u: %s
Error at parameter '%s': %s
Error at property '%s': %s
Error clearing channel_id table
Error code from opus_encode_float():
Error compiling '
Error creating VideoEncodeAccelerator
Error decoding HPACK entry name.
Error decoding HPACK entry value.
Error decoding component %d.
Error deleting cache entry: %s
Error dropping old origin_bound_certs table
Error during WebSocket handshake:
Error during WebSocket handshake: Invalid status line
Error during WebSocket handshake: Unexpected response code: %d
Error during layout qualifier parsing.
Error during loading
Error entering new symbol into symbol table
Error fetching PAC URL from DHCP:
Error finalizing code.
Error getting IP address.
Error handling response
Error in connection establishment:
Error in connection establishment: net::ERR_INSUFFICIENT_RESOURCES
Error in dxva_picture_buffer_win.cc on line
Error in dxva_video_decode_accelerator_win.cc on line
Error in event handler
Error in invocation of %s(%s): %s
Error in permessage-deflate:
Error in replacing default auth module,
error:
Error in reserved field of WOFF header
Error in the Arf buffer
Error in the Golden buffer
Error in the Last buffer
Error in user chunk
Error initializing symbols (
Error initializing video_encoder
Error installing extension '%s'.
Error loading debugger
Error message should be at most 2048 characters long
Error muxing audio data
Error muxing video data
Error number %d occurred
Error on writing stream!
Error parsing '
Error parsing 'integrity' attribute ('
Error parsing VP8 payload descriptor!
Error parsing attribute name
Error parsing header X-XSS-Protection:
Error parsing intermediate
Error parsing prefix parameter: %s
Error processing ICE candidate
Error processing ICE candidate.
Error processing argument at index %d,
conversion failure from %s
Error reading COC marker
Error reading COC marker (bad number of components)
Error reading COD marker
Error reading CRG marker
Error reading DSIG offset and length in TTC font
Error reading MCC marker
Error reading MCO marker
Error reading MCT marker
Error reading PLM marker
Error reading PLT marker
Error reading POC marker
Error reading PPM marker
Error reading PPT marker
Error reading PPT marker: packet header have been previously found in the main header (PPM marker).
Error reading QCC marker
Error reading QCD marker
Error reading RGN marker
Error reading SOT marker
Error reading SPCod SPCoc element
Error reading SPCod SPCoc element,
Invalid cblkw/cblkh combination
Error reading SPCod SPCoc element,
Invalid code-block style found
Error reading SQcd or SQcc element
Error reading TLM marker
Error reading TTC tag
Error reading TTC version
Error reading basic table elements
Error reading broker pipe
Error reading more basic table fields
Error reading number of TTC fonts
Error reading number of tables
Error reading offset to OffsetTable
Error reading table directory
Error reading table directory search header
Error reading the budget database.
Error reading total sfnt size
Error reading version tag
Error recognition
Error registering collation function
Error requesting cache %s: %s
Error requesting cache names: %s
Error requesting requests for cache %s: %s
Error requesting responses for cache %s : %s
Error restoring context
Error reverse compiling '
Error sending sync broker message
Error set encoder parameters (loss =
Error set encoder rate (total bitrate bps =
Error setting minimum playout delay.
Error starting capture
Error starting screen capture
Error starting tab capture
Error trying to initialize the native window.
Error vacuuming database
Error while loading in SelMain: %s
Error while parsing the 'require-sri-for' Content Security Policy directive:
Error while parsing the 'sandbox' Content Security Policy directive:
Error while parsing the 'sandbox' attribute:
Error with FTYP signature Box size
Error with Feature-Policy header:
Error with JP Signature : bad magic number
Error with JP signature Box size
Error with SIZ marker size
Error with SIZ marker: IHDR w(%u) h(%u) vs. SIZ w(%u) h(%u)
Error with SIZ marker: illegal tile offset
Error with SIZ marker: invalid tile size (tdx: %d,
tdy: %d)
Error with SIZ marker: negative or zero image size (%lld x %lld)
Error with SIZ marker: number of component is illegal ->
%d
Error with SIZ marker: number of component is not compatible with the remaining number of parameters ( %d vs %d)
Error writing address attribute: unknown family.
Error writing ancillary chunked compressed data
Error writing output
Error writing xor-address attribute: unknown family.
Error writing,
bytes_written=
Error: Unable to call method
Extension or internal compilation error in %s at line %d.
Failed to analyze start state.
Failed to enable MMCSS (error code=
Failed to encode frame. Error code:
Failed to get EGLSync attribute. error code:
Failed to load Blob: error code =
Failed to open printer,
error =
Failed to read segment start range %d
Failed to start AEC debug recording
Failed to start WASAPI render thread.
Failed to start child process
Failed to start embedded service:
Failed to start output streaming:
Failed to start remoting:
Failed to start the Capture device.
Failed to wait for GLFence. Error code:
Failed to wait for GLFence
context was lost. Error code:
Failed with error code %d
Fatal error - scanner input buffer overflow
Fatal error in file %s,
line %d: !(%s)
Final segment start and end must be 0xFFFF (0x%04X-0x%04X)
Force marking at random points between 0 and X (inclusive) percent of the regular marking start limit
Function start pos
GATT Error Unknown.
GL ERROR :
GL error from driver
GOP timecode frame start number,
in non-drop-frame format
Generic error in an external library
GetAvailability() isn't supported at the moment. It can be due to a permanent or temporary system limitation. It is recommended to try to blindly start a presentation in that case.
GetLocalAddress: unable to get local addr,
socket=
GetRemoteAddress: unable to get remote addr,
socket=
Got a server certificate with error
Got unhandled RTC error
HTTP ERROR
Hcannot call stop without calling start first.
Html,
body { height: 100% } parsererror + svg { width: 100%
height: 100% }
ICC profile tag start not a multiple of 4
If (typeof(chrome) == 'undefined') { chrome = {}
}
if (typeof(chrome.benchmarking) == 'undefined') { chrome.benchmarking = {}
}
chrome.benchmarking.isSingleProcess = function() { native function IsSingleProcess()
return IsSingleProcess()
}
chrome.Interval = function() { var start_ = 0
var stop_ = 0
native function HiResTime()
this.start = function() { stop_ = 0
start_ = HiResTime()
}
this.stop = function() { stop_ = HiResTime()
if (start_ == 0) stop_ = 0
}
this.microseconds = function() { var stop = stop_
if (stop == 0 &
&
start_ != 0) stop = HiResTime()
return Math.ceil(stop - start_)
}
}
If (window.chrome &
&
window.chrome.embeddedSearch &
&
window.chrome.embeddedSearch.newTabPage &
&
window.chrome.embeddedSearch.newTabPage.oninputstart &
&
typeof window.chrome.embeddedSearch.newTabPage.oninputstart == 'function') { window.chrome.embeddedSearch.newTabPage.oninputstart()
true
}
In 'prefix|str',
prefix and str must each start with an NFC boundary
InitBroker failed with error
InitModule failed with error
Internal error at %s:%d
Internal error checking chromaticities
Internal error handling cHRM coefficients
Internal error handling cHRM->
XYZ
Internal error in xsltAcquireResultInScopeNs(): Failed to compute a unique ns-prefix for the generated element
Internal error in xsltApplyImports(): The XSLT 'apply-imports' instruction was not compiled.
Internal error in xsltChoose(): The XSLT 'when' instruction was not compiled.
Internal error in xsltComputeAllKeys(): The context's document info doesn't match the document info of the current result tree.
Internal error in xsltCopyOf(): failed to cast an XPath object to string.
Internal error in xsltCopyText(): Failed to copy the string.
Internal error in xsltFlagRVTs(): Cannot retrieve the doc of a namespace node.
Internal error in xsltFlagRVTs(): Cannot retrieve the doc of a node.
Internal error in xsltForEach(): The XSLT 'for-each' instruction was not compiled.
Internal error in xsltForEach(): The selecting expression of the XSLT 'for-each' instruction was not compiled correctly.
Internal error in xsltIf(): The XSLT 'if' instruction was not compiled.
Internal error in xsltKeyFunction(): Could not get the document info of a context doc.
Internal error in xsltKeyFunction(): Couldn't get the doc of the XPath context node.
Internal error in xsltKeyFunction(): The context node is not set on the XPath context.
Internal error in xsltParseStylesheetCallerParam(): The XSLT 'with-param' instruction was not compiled.
Internal error in xsltParseStylesheetCallerParam(): XSLT 'with-param': The attribute 'name' was not compiled.
Internal error in xsltParseStylesheetParam(): The XSLT 'param' declaration was not compiled correctly.
Internal error in xsltParseStylesheetVariable(): The XSLT 'variable' instruction was not compiled.
Internal error in xsltParseStylesheetVariable(): The attribute 'name' was not compiled.
Internal error in xsltValueOf(): The XSLT 'value-of' instruction was not compiled.
Internal error in xsltValueOf(): failed to cast an XPath object to string.
Invalid error code
Invalid opcode (enable with --experimental-wasm-anyref)
Invalid opcode (enable with --experimental-wasm-eh)
Invalid opcode (enable with --experimental-wasm-sat_f2i_conversions)
Invalid opcode (enable with --experimental-wasm-se)
Invalid opcode (enable with --experimental-wasm-simd)
Invalid opcode (enable with --experimental-wasm-threads)
Invalid start function: non-zero parameter or return count
IrOpcode::kStart == start->
opcode()
It is an error to call 'apply-imports' when there's no current template rule.
It is an error to use gl_WorkGroupSize before declaring the local group size
IterationStart must be non-negative
JPEG error with no jmp_buf set.
Japanese Keyboard with One-touch start buttons
Layout: ClassRangeRecord %d start overlaps with end of the previous one: %u <
= %u
Layout: ClassRangeRecord %d,
start >
end: %u >
%u
Layout: bad start coverage index.
Listen() failed with error
MaxSpatialBitrate (%d) should be larger than SpatialBitrate (%d),
considering it as error setting
Member error is not of type DOMException.
Memory hole between end of BSS and start of stack is negative in size
Min percentage of live bytes on a page to enable fast evacuation
Missing STUN_ATTR_NONCE attribute in stale nonce error response.
Missing STUN_ATTR_REALM attribute in stale nonce error response.
Missing allocate response error code.
Missing binding response error code.
Mprotect: start addr not allocation multiple
MprotectInternal: failed to change the memory protection with VirtualProtect() addr 0x%08x,
error %d (0x%x)
MprotectInternal: failed to change the memory protection with VirtualProtect,
addr 0x%08x,
error %d (0x%x)
Multiple FlexFEC streams in local SDP,
but our implementation only supports a single FlexFEC stream. Will not enable FlexFEC for proposed stream with SSRC:
MunmapInternal: Could not VirtualFree MEM_DECOMMIT addr 0x%08x,
error %d (0x%x)
MunmapInternal: UnmapViewOfFile failed to at addr 0x%08I64x,
error %d
MunmapInternal: failed to fill hole with VirtualAlloc(),
error %d
NFC data transfer error has occurred.
NaClAppLoadFile: Failed to make image pages writable. Error code 0x%x
NaClAppThreadSetSuspendedRegistersInternal: SetThreadContext() failed,
error %u
NaClDescEffLdrUnmapMemory: UnmapViewOfFile failed at user addr 0x%08I64x (sys 0x%08I64x) error %d
NaClDescEffLdrUnmapMemory: VirtualFree at user addr 0x%08I64x (sys 0x%08I64x) failed: error %d
NaClDropFilePosLock: UnlockFileEx failed,
error %u
NaClFaultInjection: syntax error in configuration
environment variable NACL_FAULT_INJECTION contains %s,
which is not syntactically correct.
NaClFindAddressSpaceRandomized: VirtualFree of VirtualAlloc result (0x%I64xfailed,
GetLastError %d.
NaClHostDescPRead: ReadFile failed,
error %d
NaClHostDescPWrite: WriteFile failed,
error %d
NaClHostDescPosixMake(%d,
0x%x): Take failed,
error %da
NaClHostDescRead: ReadFile error %d
NaClHostDescTruncate: SetFilePointerEx failed: last error %d.
NaClHostDescTruncate: could not truncate file: last error %d.
NaClHostDescUnmapUnsafe: UnmapViewOfFile() failed: start address 0x%p,
length 0x%I64x,
offset 0x%I64x,
error %d
NaClHostDescWrite: WriteFile error %d
NaClLockAndGetCurrentFilePos: SetFilePointerEx failed,
error %u
NaClMadvise: start address not a multiple of page size
NaClMemoryProtection: NaClMprotect(0x%08I64x,
0x%08I64x,
0x%x) failed,
error %d (data)
NaClMemoryProtection: NaClMprotect(0x%08I64x,
0x%08I64x,
0x%x) failed,
error %d (rodata)
NaClMemoryProtection: NaClMprotect(0x%08I64x,
0x%08I64x,
0x%x) failed,
error %d (trampoline + code)
NaClMemoryProtection: NaClSysMmapIntern(nap,
0x%08I64x,
0x%08I64x) failed,
error %d (stack)
NaClMprotect: start address not a multiple of page size
NaClPageAlloc: re-allocation failed at 0x%016I64x,
error %d
NaClPageFree: VirtualFree(0x%016I64x,
0,
MEM_RELEASE) failed with error 0x%X
NaClPatchWindowsExceptionDispatcherWithCheck: Unexpected start instructions
NaClPerfCounterStart received null pointer
NaClSetCurrentFilePosAndUnlock: SetFilePointerEx failed: error %d
NaClSysMmap: start address (0x%08I64x) outside address space
NaClSysToUser: sysaddr 0x%08I64x,
mem_start 0x%08I64x,
addr space %d bits
NaClTakeFilePosLock: LockFileEx failed,
error %u
NaClUntrustedThreadResume: ResumeThread() call failed,
error %u
NaClUntrustedThreadSuspend: GetThreadContext() failed,
error %u
NaClUntrustedThreadSuspend: SuspendThread() call failed,
error %u
NaClXlateSystemError: UNEXPECTED ERROR %d (0x%x),
returning EINVAL
NaClXlateSystemError: windows error code %d (%s) ->
%d
Nacl::Map: MapViewOfFileEx() failed,
error %d
Names cannot start with '-'.
Nap->
data_start = 0x%016I64x
Nap->
dynamic_text_start = 0x%016I64x
Nap->
rodata_start = 0x%016I64x
Needs-ice-restart flag cleared for transport
Needs-ice-restart flag set for transport
NetLogExporter::Start deserializer
No error message provided
Notation declaration doesn't start and stop in the same entity
OnHeaderBlockStart called more than once!
OpenSSL SYSCALL error,
earliest error code in error queue:
OsError 0x%lx (%lu)
Out of order start range (%d <
= %d)
Output file write error --- out of disk space?
PI declaration doesn't start and stop in the same entity
Parameter error should have been detected already
PhysicalSocketServer got FD_ACCEPT_BIT error
PhysicalSocketServer got FD_CLOSE_BIT error
PhysicalSocketServer got FD_CONNECT_BIT error
PhysicalSocketServer got FD_READ_BIT error
PhysicalSocketServer got FD_WRITE_BIT error
Player load failure: error creating media player
Plugin::NexeDidCrash: error already reported
suppressing
Pointer in register for range %d:%d (start at %d) at safe point %d
Property 'scope' ignored. Start url should be within scope of scope URL.
Push subscriptions that don't enable userVisibleOnly are not supported.
RO data region start 0x%08I64x,
size 0x%08I64x,
end 0x%08I64x
RW data region start 0x%08I64x,
size 0x%08I64x,
end 0x%08I64x
RW stack region start 0x%08I64x,
size 0x%08I64x,
end 0x%08I64x
Range start greater than end in starred-relation string
Range start must not succeed its end
Range without start in starred-relation string
Received TURN CreatePermission error response,
code=
Received start of new message but previous message is unfinished.
Recover attempts a restart cnt:%d
Refusing to start loop-back because this machine cannot provide high-resolution timestamps.
Relative references must start with either /,
./,
or ../.
Remote peer requests ICE restart for
RemoveIceCandidates: Error when removing remote candidates:
Required member error is undefined.
Rodata_start = 0x%08I64x
Rodata_start not a multiple of allocation size
RtlGenRandom failed: error 0x%x
Run ncval <
module-name>
for validation error details.
SSL certificate error when fetching PAC script,
aborting.
SSL_send_fatal_alert failed,
error =
SSL_shutdown failed,
error =
Server returned 5XX Server Error reply
Service::OnStart deserializer
Session error code:
Session error description:
Set error concealment strategy
Set error detection flags
Set error detection flags (deprecated
use err_detect,
save via avconv)
Shift timestamps so they start at 0
Shm txt region start 0x%08I64x,
size 0x%08I64x,
end 0x%08I64x
Some drivers are unable to reset the D3D device in the GPU process sandbox
Start
Start >
end
Start <
end
Start == rpo_order->
at(0)
Start Of Frame 0x%02x: width=%u,
height=%u,
components=%d
Start Of Scan: %d components
Start addr not allocation multiple
Start function for wasm AST trace (inclusive)
Start getting ports with prune_turn_ports
Start lookup %d
Start of
Start of Image
Start of literal
Start offset % is outside the bounds of the buffer
Start point not in bounds
Start punctuation
Start tag expected,
'<
' not found
Start time
Start to read j2k main header (%d).
Start value
Stream error while reading JP2 Header box
Stream error while reading JP2 Header box: box length is inconsistent.
Stream error while reading JP2 Header box: no 'ihdr' box.
Syntax error after column name %.*s
TCP accept failed with error
TCP bind failed with error
TCP connect failed with error
The HTMLMediaElement.error attribute is not null.
The MediaRecorder failed to start because there are no audio or video tracks available.
The promise was resolved with an error response object.
The provided start value (
The statement callback raised an exception or statement error callback did not return false
There was an error computing an integrity value for resource '
Trampoline/text region start 0x%08I64x,
size 0x%08I64x,
end 0x%08I64x
Type error in global initialization,
expected %s,
got %s
Type error in init expression,
expected %s,
got %s
Type error in merge[%u] (expected %s,
got %s)
UDP bind failed with error
URLLoaderFactory::CreateLoaderAndStart deserializer
Unable for apply variation axis properties for font:
Unable to abort the payment
Unable to access microphone.
Unable to access speaker.
Unable to ack block length.
Unable to add certificate.
Unable to add key.
Unable to allocate shmem for first frame capture: OOM?
Unable to assign payload type to format:
Unable to attach MediaSource
Unable to begin transaction
Unable to claim interface.
Unable to clear endpoint.
Unable to close due to unfinalized statements or unfinished backups
Unable to commit transaction
Unable to connect to the Google Talk service due to an incompatibility with your proxy.
Unable to connect to the Mojo BudgetService.
Unable to convert arguments
Unable to convert params
Unable to create AuthHandler. Status:
Unable to create CDM.
Unable to create DTMF sender attribute on an audio sender
Unable to create DTMF sender for track
Unable to create MediaKeySystemAccess
Unable to create a framebuffer.
Unable to create an instance of layout class '
Unable to create begin trace
Unable to create cache
Unable to create file:
Unable to create index domain in update to version 9.
Unable to create index is_transient in update to version 9.
Unable to create pbuffer.
Unable to create the Windows Security Manager instance
Unable to decode PNG for
Unable to decode audio data
Unable to decrypt payload.
Unable to decrypt while key diversification is pending
Unable to delete cache folder.
Unable to delete cache.
Unable to delete channel ids.
Unable to delete cookies on shutdown.
Unable to delete session cookies.
Unable to delete/modify collation sequence due to active statements
Unable to delete/modify user-function due to active statements
Unable to deserialize SharedArrayBuffer.
Unable to deserialize cloned data due to invalid or unsupported version.
Unable to deserialize cloned data.
Unable to deserialize the value.
Unable to dismount volume.
Unable to drop table cookie_times in update to version 9.
Unable to find device for layer.
Unable to find free frame buffer
Unable to find required WlanApi function.
Unable to find resource:
Unable to fix block file
Unable to get another cache folder
Unable to get device context for window.
Unable to get device number.
Unable to get handle to thread.
Unable to get pbuffer device context.
Unable to get preferred audio params for
Unable to get system path.
Unable to get the page. error code=%d
Unable to get the pixel format for GL context.
Unable to get volume disk extents.
Unable to grow instance memory.
Unable to identify the object to be reindexed
Unable to insert a node into a Range starting from the node itself.
Unable to instantiate font face from font data.
Unable to load PowerXpress query function
Unable to load URL due to content type
Unable to load WlanApi.dll.
Unable to load aticfx dll.
Unable to load image with id
Unable to locate service manifest for
Unable to lock volume.
Unable to make gl context current.
Unable to map Index file
Unable to map memory for readback.
Unable to move cache folder
Unable to move node into self or descendant
Unable to move the cache:
Unable to open a temporary database file for storing temporary tables
Unable to open a window with invalid URL '
Unable to open database
Unable to open database file
Unable to open database,
failed to create 'info' table
Unable to open database,
failed to read current version
Unable to open database,
failed to start transaction
Unable to open database,
failed to write current version
Unable to open database,
version mismatch,
'
Unable to open database: %s
Unable to parse PPS from H264 bitstream.
Unable to parse SPS from H264 bitstream.
Unable to parse Transport Parameters
Unable to parse fmtp parameter. '=' missing.
Unable to parse quantizer from encoded
Unable to parse the layout function result,
falling back to block layout.
Unable to parse the layout request,
falling back to block layout.
Unable to perform layout request due to an invalid child,
falling back to block layout.
Unable to populate array 'ChromeSettingsOverrides'
Unable to populate array 'ContentCapabilities'
Unable to populate array 'ExternallyConnectable'
Unable to populate array 'SocketHostPatterns'
Unable to populate array 'UsbPrinters'
Unable to populate array 'bluetooth'
Unable to populate array 'object'
Unable to populate array 'search_provider'
Unable to preventDefault inside passive event listener due to target being treated as passive. See https://www.chromestatus.com/features/5093566007214080
Unable to preventDefault inside passive event listener invocation.
Unable to read ConnectionId length.
Unable to read ConnectionId.
Unable to read Destination ConnectionId.
Unable to read Source ConnectionId.
Unable to read ack block count.
Unable to read ack block value.
Unable to read ack delay time.
Unable to read application close error code.
Unable to read application close error details.
Unable to read cached response: %s
Unable to read connection close error code.
Unable to read connection close error details.
Unable to read first ack block length.
Unable to read frame data.
Unable to read frame type.
Unable to read gap block value.
Unable to read gap to next ack block.
Unable to read go away error code.
Unable to read goaway reason.
Unable to read incremental time delta in received packets.
Unable to read largest acked.
Unable to read last good stream id.
Unable to read least unacked delta.
Unable to read new connection ID frame connection id.
Unable to read new connection ID frame sequence number.
Unable to read nonce proof.
Unable to read nonce.
Unable to read num of ack blocks.
Unable to read num received packets.
Unable to read offset.
Unable to read packet number.
Unable to read protocol version.
Unable to read public flags.
Unable to read reset message.
Unable to read rst stream error code.
Unable to read rst stream sent byte offset.
Unable to read rst stream stream id.
Unable to read sequence delta in received packets.
Unable to read stop sending application error code.
Unable to read stop sending stream id.
Unable to read stream data length.
Unable to read stream data offset.
Unable to read stream_id.
Unable to read supported version in negotiation.
Unable to read the cached response,
error code: %d
Unable to read the current version
Unable to read time delta in received packets.
Unable to read type.
Unable to read version
Unable to read window byte_offset.
Unable to release interface.
Unable to remove the specified node from the original parent.
Unable to reset the device.
Unable to rewind ivf output file.
Unable to serialize accessibility tree.
Unable to serialize the data provided in the result,
falling back to block layout.
Unable to set ContentDecryptionModule object
Unable to set device configuration.
Unable to set device interface.
Unable to set new version in database
Unable to set playout device.
Unable to set recording device.
Unable to set the pixel format for GL context.
Unable to set the pixel format for temporary GL context.
Unable to update cookie database to version 3.
Unable to update cookie database to version 5.
Unable to update cookie database to version 6.
Unable to update cookie database to version 7.
Unable to update cookie database to version 8.
Unable to use function %s in the requested context
Unable to write IVF header for ivf output file.
Unable to write frame to file.
Unable to write international text
Unexpected RLE at start of packet.
Unexpected error retrieving WPAD configuration from DHCP.
Unix epoch start is %I64ums in Windows epoch time
Unknown OpenSSL error
Unknown error
Unknown error occurred
Unknown error occurred during transaction postflight
Unknown error occurred during transaction preflight
Unknown error occurred while trying to verify integrity.
Unknown error when connecting to the device.
Unknown internal error occurred.
Unrecognized error code
Unregistered error message
Us append_window_start
Used by tracing internally to enable gc statistics
VDA Error
VideoEncodeAcceleratorClient::NotifyError deserializer
Visitor_->
OnHeaderFrameStart returned nullptr
WASAPIAIS::Start: Failed to start audio client,
hresult = %#lx
WASAPIAIS::Start: Failed to start render client for loopback,
hresult = %#lx
WelsEncoderEncodeExt(),
Logic Error Found in Preprocess updating. ForceCodingIDR!
WelsEncoderEncodeExt(),
Logic Error Found in temporal level. ForceCodingIDR!
WelsEncoderEncodeExt(),
multi-slice (mode %d) encoding error = %d!
When ServiceWorker respond to the request from fetch() with an error response,
FetchManager::Loader::didFail() must be called instead.
WindowTreeClient::OnDragDropStart deserializer
Wireless Keyboard with One-touch start buttons
Writing reset-stream error code failed.
Wrong value in code start register passed
XML declaration allowed only at the start of the document
XmlParseInternalSubset: error detected in Markup declaration
Xperia S [Adb-Enable Mode]
Xperia arc S [Adb-Enable Mode]
Xsl:import : unable to load %s
Xsl:include : unable to load %s
Xsl:key : error missing match
Xsl:key : error missing name
Xsl:key : error missing use
Xsl:template : error invalid name '%s'
Xsl:template: error duplicate name '%s'
XsltDocumentElem: unable to save to %s
XsltFormatNumberConversion : error in format string '%s',
using default
[IncrementalMarking] Start (%s): old generation %dMB,
limit %dMB,
slack %dMB
[IncrementalMarking] Start delayed - serializer
[IncrementalMarking] Start marking
[IncrementalMarking] Start sweeping.
] receive failed with error