Error Creating all Intel CUI keys..
FATAL:Unable to restore adapter state!
FATAL:Unable to save adapter state!
Unable to set Adapter Mem Size in registry!!!
<
==== Enable HPLL water mark control
AUXHANDLER_WriteI2C(): ERROR Number of bytes to be written %d
ActivateRepeater: Event read failed with follwing error %x
ComDetectDevice: unable to get Display Uid !!!
EDIDPARSER_ValidateEDIDBlock(): ERROR - Failed checksum calculation
EDIDPARSER_ValidateEDIDBlock(): ERROR - Header is not proper
EDIDPARSER_ValidateVTBExtension(): ERROR - Extension tag is incorrect
EDIDPARSER_ValidateVTBExtension(): ERROR - Failed checksum calculation
EDIDPARSER_ValidateVTBExtension(): ERROR - No. of DTD or CVT or ST blocks are invalid
ERROR: Trying to enable support for directory different than already enabled
WARNING: Enable command received when already enabled
WRITE_STATUS_UPDATE: ERROR Number of bytes to be written to I2C Slave still not complete = %d
XVYCC Enable preference and GMP DIP status are not in sync
ACPI_CM_EvaluateDSM - _DSM evaluation failed, func code (%ld) error (0x%lX)!
ACPI_CM_GetHGFuncSupport: Unable to evaluate _DSM for sub function code 0
AIMENCODER_Cb_SetControllerTiming: ERROR - Callback getting called in an indirect manner!
AIMENCODER_IsDisplayAttached(): ERROR - Couldn't set encoder(%d) power state to D0(%d)!
AIMENCODER_SetDisplayPowerState() - ERROR: Caller trying to enable monitor on a switched off encoder!
AIMLFPENCODER_Initialize(): ERROR - No timings in panel's EDID!
AUXHANDLER_ReadData(): Error - message size is more than 20 bytes! Truncating...
AUXHANDLER_ReadData(): Error reading data
AUXHANDLER_ReadData(): Error timeout during read
AUXHANDLER_ReadI2C(): ERROR - Invalid buffer size on I2C_ACK
AUXHANDLER_ReadI2C(): ERROR - got I2C NACK
AUXHANDLER_ReadI2C(): ERROR got AUX NACK
AUXHANDLER_WriteI2C(): ERROR - Only %d bytes were written to sink!
AUXHANDLER_WriteI2C(I2C NACK): ERROR - Request for status update resulted in NACK/DEFER or ACK with less bytes
AcpiIsNVHGSupported: Error while Getting Current GPU Policy
AcpiIsNVHGSupported: Unable to change the dGPU Power
AddMonitorMode: Unable to add monitor mode!!!
AddMonitorMode: Unable to release monitor mode info!!!
BASEBITBASHING_I2CAccess() failed, error code: #%d
BASEWATERMARK_CalculateWaterMark(): ERROR - Calculating WM for WM plane %d!
BASEWATERMARK_ProgramAllNormalWaterMark(): ERROR - Cannot retrieve plane object for plane %d
BASEWATERMARK_ProgramAllNormalWaterMark(): ERROR - Pipe for %d plane is NULL_PIPE! Cannot happen at this level of code
BIOSTODRV_OpReg_GetDutyCycleMappingTbl: Unable to read the BCLM Field
BIOSTODRV_OpReg_GetGammaCCDV: Unable to Write to TCHE Field
BIOSTODRV_OpReg_GetPWMFreqAndMinBrightness: Unable to read the PFMB Field
BIOSTODRV_OpReg_GetPowerConservationFeatures: Unable to read the PCFT Field
BIOSTODRV_OpReg_GetSetAls Unable to Read the requested ALS
BIOSTODRV_OpReg_GetSetAls Unable to Set the requested ALS
BIOSTODRV_OpReg_GetSetBrightness Unable to Read the requested Brightness
BIOSTODRV_OpReg_GetSetBrightness Unable to Set the requested Brightness
BIOSTODRV_OpReg_HandleASLEComand: Unable to acknowledge BIOS!!
BIOSTODRV_OpReg_HandleASLECommand: Unable to Get Enabled Events from TCHE Field
BIOSTODRV_OpReg_IndicateDrvRdy: Unable to Indiacate Driver Readiness to BIOS
BIOSTODRV_OpReg_IsEventEnabled: Unable to Write to TCHE Field
BIOSTODRV_OpReg_SetEvent: Unable to Read TCHE Field
BIOSTODRV_OpReg_SetEvent: Unable to Write to TCHE Field
BIOSTODRV_OpReg_SetPanelFittingState: Unable to Write to TCHE Field
BIOSTODRV_OpReg_SetSupportedPanelFittingStates: Unable to Write to TCHE Field
BlcMapDDIUserSetting(): Unable to get inverter duty cycle mapping table!!
BlcPwmActivate_GEN4(): ERROR - Invalid (zero) PWM frequency in BPCR !!
BlcPwmActivate_GEN6(): ERROR - Invalid (zero) PWM frequency in BPCR !!
CSLBASE_GetCSC(): ERROR - Couldn't retrieve CSC co-efficients for 0x%x
CSLBASE_SetCompensation(): ERROR - Couldn't save compensation value into registry for 0x%x
ComGetModeTable : ERROR! unable to allocate memory!
DestroyBiosToDrvOpregionMailbox: Unable to Inform BIOS that Driver is ready
DwHBlankStart = %d (Hex: %X)
DwHSyncStart = %d (Hex: %X)
DwVBlankStart = %d (Hex: %X)
DwVSyncStart = %d (Hex: %X)
DxgkDdiQueryChildRelations: SgGetNumberOfChildren failed, error = 0x%lX!
DxgkDdiResetFromTimeout: Unable to Notify bios about driver readiness for MailBox#3
DxgkDdiStartDevice ERROR unable to Initialize NonDisplay Components!
DxgkDdiStartDevice ERROR! unable to initialize KCH library! Status : %x
DxgkDdiStartDevice ERROR! unable to initialize SoftBIOS library! Status : %x
DxgkDdiStartDevice ERROR! unable to initialize Vbt info!
DxgkDdiStartDevice: Unable to initialize Cursor Info.!
DxgkDdiStartDevice: Unable to initialize Interrupt Framework.!Hence Exiting with STATUS_INVALID_PARAMETER
DxgkDdiStartDevice: Unable to initialize Miniport Vtbl!Hence Exiting with STATUS_INVALID_PARAMETER
DxgkDdiStartDevice: Unable to register KmBugcheckSecondaryDumpDataCallback
EDIDPARSER_ParseVTBExtDTDBlock: Unable to Add mode to list!
EDIDPARSER_ParseVTBExt_CVTs: Unable to Add mode to list!
EDIDPARSER_ParseVTBExt_StdModes: Unable to Add mode to list!
EMBEDDED_DPSINK_Initialize(): ERROR - No timings in panel's EDID!
EVENT MANAGER:GfxGetDisplayDetect: Unable to detect displays
Em_Notify_Commit: This is Error Case as PRIMARY should be Absent only when Topology is getting destroyed
Error Unable to allocate resource
Error allocating PPGTT, Cleanup and init legacy mode!
Error: Unable to allocate blockdesc
FDI Training Link Symbol Lock Achieved but Some Error Parameters with the FDI Training
GEN4WATERMARK_Init(): ERROR - Could not get latency table info for %d memory frequency and %d channel
GEN4WATERMARK_ProgramWaterMark(): ERROR - Computed watermark (%d) is below minimal value (%d)
GEN5WATERMARK_Init(): ERROR - Could not get latency table info for %d memory frequency and %d channel
GEN5WATERMARK_ProgramWaterMark(): ERROR - Computed watermark (%d) is below minimal value (%d)
GEN6WATERMARK_CalculateWaterMark(): ERROR - Calculating WM for WM plane %d!
GEN6WATERMARK_Init(): ERROR - Could not get latency table info for %d memory frequency and %d channel
GEN6WATERMARK_ProgramWaterMark(): ERROR - Computed watermark (%d) is below minimal value (%d)
GFX_NVTurnOffdGPU: Unable to Turn Off dGPU.Failed with NTSTATUS 0x%x
GMBUSHANDLER_ErrorHandler() - ERROR: Resolving a bus error (GMBUS2 = 0x%X)
GMBUSHANDLER_ReadDDC() - ERROR in Segment-Pointer write. EDID Block is not read.
GMBUSHANDLER_SegPointerWrite() - ERROR while writing to Segment Pointer
GMBUSHANDLER_SwitchToDDC2() - ERROR: Got bus error while putting DDC monitor to DDC2
GMCHBASE_CalculateWaterMark(): ERROR - Input pipe index was NULL_PIPE and ePlaneType(%d) is not enabled!
GMCHBASE_CalculateWaterMark(): ERROR - PC trying to set watermark for an plane associated(%d) with a disabled pipe(%d)!
GMCHBASE_GammaHandler(): ERROR -Invalid pipe or plane type
GMCHBASE_WaitForVBlank: ERROR - called when all pipes disabled!!
GMCHGEN4_SetGMBusUnitFrequency: ERROR - GMBus clock value was computed to be 0
GMCHGEN6_CalculateWaterMark(): ERROR - PC trying to set watermark for an plane associated(%d) with a disabled pipe(%d)!
GMCHGEN6_GetCSC(): ERROR - Pipe object is NULL!
GMCHGEN6_SetCSC(): ERROR - Pipe object is NULL!
GMCHGEN6_SetCSC(): ERROR - SetCSC() failed!
GfxAcquireLockToSerialize(): ERROR :: Current Thread trying to acquire same lock Again!
GfxAcquireLockToSerialize(): ERROR :: Timed out! Timeout value=%ld (in 100 nSec units)
GfxAcquireLockToSerialize(): ERROR :: Waiting for lock returned error [0x%I64X]
GfxDeactivateAllDisplayDevices: Unable to disable display devices
GfxDefaultRRForTV: Unable to get the RR for TV
GfxEnableDisableOvlMBM : Enable MBM for Sprite plane failed
GfxEnableInterruptsIfRequired :: Unable To Do Interrupt Operation
GfxFindAdapter: Unable to determine Save/Restore PM buffer size
GfxFreeAllocatedMemory: Unable to clean up content protection memory!
GfxFreeAllocatedMemory: Unable to clean up cursor info!
GfxFreeAllocatedMemory: Unable to clean up event framework!
GfxFreeAllocatedMemory: Unable to destroy GMM!
GfxGetCloneModeList: Unable to allocate memory!!!
GfxGetDdcInformation: Unable to get DDC EDID
GfxGetOEMDefaultGamma: Unable to Get CCD values from OpRegion memory with current compensation value
GfxGetPCIInfomation: unable to get device resource list! status %x
GfxGetSetCompensation: Unable to Update OpRegion memory with current compensation value
GfxGetVidPnDetails: pfnGetDisplayStart failed
GfxGetVideModeTable: Unable to allocate memory!!!
GfxInitalize: Error while Enabling PFIT EVENT
GfxInitalize: Unable to Inform BIOS that Driver is ready
GfxInitialize: Unable to Config display device!
GfxInitializeVbtInformation: Unable to get VBT info!
GfxIsPlaneSwapRequired, Unable to get Active Topology
GfxIsTwinSupported: Unable to Get Current Compensation from SB
GfxIsTwinSupported: Unable to allocate memory for stDisplayCombo.pulDisplayUid
GfxPersistDbgAssertSettings ERROR! unable to allocate memory!
GfxRetrieveDbgAssertSettings ERROR! unable to allocate memory!
GfxSetPanelFitting: Unable to Get Current Compensation from SB
GfxSetPanelFitting: Unable to Notify CUI about Panel Fitting Event
GfxSetPanelFitting: Unable to Set the Compensation
GfxSetPanelFitting: Unable to Update OpRegion memory with current compensation value
GfxSetSourceAddress : Set display start failed with status 0x%X
GfxUnmapMemory: Unable to unmap GMADR BAR!
GfxUnmapMemory: Unable to unmap GTT BAR!
GfxUnmapMemory: Unable to unmap MMIO BAR!
Gfx_IsNVHGEnabled: Unable to get HG platform CAPS.Failed with NTSTATUS 0x%x
GmmGetStandardAllocationDriverData Unable to allocate standard allocation!
GmmQuerySegmentDescriptor: Unable to cap total gfx mem to 256MB!
GsvEvalFreqInterruptDPC_LHDM_LHDM(): Unable to queue work item!!
HYBRID_GFX_Get_Active_Displays: unable to initialize CUI profile !
HwGetAvailableModes(): ERROR! unable to allocate memory!
Hybrid_Gfx_GetDdcInformation: Unable to get DDC EDID
Hybrid_Gfx_Initialize_CUI_Profile: unable to get connected devs list
Hybrid_Gfx_Initialize_CUI_Profile: unable to get current config
INTLVDSENCODER_Initialize(): ERROR - No timings in panel's EDID!
INTLVDSENCODER_LoadLVDSRegisters(): ERROR - No matching platform type found!!!
INTLVDSPORT_Enable(): Error - caller trying to enable LVDS on PipeA for Alviso!
IPLUNIT_IsHDCPEnabled: ERROR - HDCP Status on IPL Tx and Rx Mismatch!!
InitializeCursorInfo: Unable to allocate memory for cursor buffers !
InitializeCursorInfo: Unable to allocate memory for cursor cache!
KmCreateContext: Unable to allocate graphics context!
KmCreateDevice: Unable to allocate KMD device context!
KmCreateOverlay: Unable to allocate overlay context
KmDestroyRender: Unable idle HW before destroy!
KmDisplayCSCActivation: Error in size of colorspace params
KmFlipOverlay: Unable to flip overlay
KmGen6DestroyRender: Unable idle HW before destroy!
KmGen6FreeLateral3DBltResources: Unable to destroy GPU context for Lateral Blt
KmGen6FreeLateral3DBltResources: Unable to destroy device for Lateral Blt
KmGen6IdleHw: Unable idle HW!
KmGen6IdleHw: Unable idle ring!
KmGen6IdleRing: Unable idle ring!
KmGen6InitializeLateral3DBltResources: Unable to create GPU context for Lateral Blt
KmGen6InitializeLateral3DBltResources: Unable to create device for Lateral Blt
KmIdleHw: Unable idle HW!
KmIdleHw: Unable idle ring!
KmIdleRing: Unable idle ring!
KmIdleRing: Unable to issue sync flush!
KmIdleRing: Unable to restart ring!
KmIdleRing: Unable to stop ring!
KmInitRender: Unable to allocate NULL HW graphics context!
KmInitRender_Legacy: Unable to allocate NULL HW graphics context!
KmInitRender_Legacy: Unable to allocate graphics context!
KmInitRender_Legacy: Unable to setup NULL HW context!
KmInitRender_Legacy: Unable to setup PAVP clearbuffer!
KmInitRender_Legacy: Unable to setup platform specific info!
KmReset: Unable idle HW!
KmSetPowerState: Unable idle HW!
KmUpdateOverlay: Unable to update overlay context
LBPCDpcWorkItemCallback(): Unable To Read LBPC Register !!
MMDMM_ValidateAdviseConfigForCui: Unable to Get the current Compensation from SB
MODESMANAGER_GetModeEntryFromCustomMode(): ERROR - Invalid Timing Standard : %d!
MODESMANAGER_GetModeEntryFromCustomMode(): ERROR - Invalid eCustomModeType value : %d!
MODESMANAGER_GetModeEntryFromCustomMode(): ERROR - Timing Parameters are invalid!
NAPAPIPE_GetCurrentFrameCount : Unable to obtain frame count.
NVHGReadEDID3: NVHGReadEDID returned error (0x%lX) for display (0x%lX)
NVHGReadEDID3: unable to get DP params
NVHGReadEDID3: unable to retrieve Uid for Acpi Id [0x%lX]
NVHGReadEDID: unable to retrieve Uid for Acpi Id [0x%lX]
OPMDestroyProtectedOutput: Error while setting protection level Status=0x%x
OSAllocQueueWorkItem FAILED Unable to allocate Work Item object!
OSAllocateMem FAILED Unable to allocate requested memory!
OSCreateEvent ERROR! unable to allocate event object!
OSMapMemory: Unable to map memory!
OSPCIReadCfgReg: Unable to get PCI Data
OSPCIWriteCfgReg: Unable to set PCI Data
PCALS.C - AlsGetLux: Unable to read LBPC
PCALS.C - AlsGetLux: Unable to read Mailbox 3 ALSI field
PCBLC.C - BlcEnableInverter: Failed to enable the inverter
PCBLC.C - BlcGetUser: Unable to read LBPC
PCBLC.C - BlcI2CApply: ERROR - New Backlight Settings Not Applied
PWRCONS.C - PwrConsPolicyWriteRegistry: Unable to write to Registry
PWRCONS.C - VerifyDisplayConfig: Error!!! Unable to get display devices from SOFTBIOS!!!
PathUpdateCompensation : Unable to update the compensation of path [%p]
PathUpdateCompensation : Unable to get the compensation of path [%p]
PathUpdateCompensation : Unable to update the compensation of path [%p]
PcGsvEvalIntervalExpireInterruptDpc_LHDM(): Unable to queue work item!!
PcGsvFreqDownwardTimeoutRc6InterruptDpc_LHDM(): Unable to queue work item!!
PcGsvRpDownThresholdInterruptDpc_LHDM(): Unable to queue work item!!
PcGsvRpUpThresholdInterruptDpc_LHDM(): Unable to queue work item!!
PcGsvSwComCompleteInterruptDpc_LHDM(): Unable to queue work item!!
PwrConsEnableInterrupt_LHDM(): Cannot Enable Power Conservation Interrupt !!
REGISTRYMANAGER_GetInfModes(): Error while reading REG_NUMBER_OF_OEM_STATIC_MODES registry key
REGISTRYMANAGER_GetInfModes(): Error while reading STATIC_MODE_%1d registry key
REGISTRYMANAGER_GetMediaSrcModes(): Error while reading MEDIA_MODE_%1d registry key
REGISTRYMANAGER_GetMediaSrcModes(): Error while reading REG_NUMBER_OF_MEDIA_SRC_MODES registry key
REGISTRYMANAGER_ReadFakeEDIDmodes(): Error while reading DTDs present in Registry Keys
REG_DISP1_TVSTANDARDSETSUCCESS Registry unable to Update in RecommendMonitorModes!!
REG_TD_DEBUGCONTROL2 is not set or error reading registry. ReturnStatus: 0x%x
RecommedMonitorModes: Unable to allocate memory for monitor mode info!!!
RecommendMonitorModes: Unable to allocate memory for monitor mode info!!!
Reenable hot-key switching
SgCPAcpiGetMuxInfo: Unable to evaluate _DSM for sub function code %ld, error=0x%lX
SgCPAcpiGetSGFuncSupport: Unable to evaluate _DSM for sub function code %ld, error=0x%lX
Start _DOD Method Evalation to get the Package List
Start device: unable to set adapter type, 0x%x
Stop device: unable to set adapter type, 0x%x
TRANSLATOR_BuildDriverTopologyFromOsVidPn: Unable to do Memory allocation!
Translate_ComGetModeTableQuadView: Unable to find a valid mode beyond 8x6x32 for IntelPrimary in QuadView
TurboVBIHandlerDpc(): Unable to queue work item!!
UAIMEH: ERROR - UAIM_IsOutputDeviceAttached() returned failure for DFP detection
UAIMEH: Error in Disabling EEDID Filter
UAIMEH: Error in Enabling EEDID Filter
Unable to Apply Pallete Info on TPV Display
Unable to De register for Device Interface
Unable to Disable MBM for Overlay plane
Unable to Enable MBM for Overlay plane
Unable to allocate Hdcp2ndStep work item
Unable to allocate Ovl surfaces for overlay HW MBM
Unable to allocate PerPageBitArray!
Unable to allocate Timer object!
Unable to allocate contiguous memory!
Unable to allocate independent MDL memory!
Unable to allocate pGammaRamp object!
Unable to allocate pSBPaletteTable object!
Unable to allocate register back buffer
Unable to allocate timer work item
Unable to allocated DMA buffer for overlay downscale
Unable to find two flippable display buffers!
Unable to get Stolen Memory addr
Unable to get Stolen Memory size
Unable to get Stolen pages
Unable to get System Physical Memory Ranges
Unable to get a Stolen page
Unable to get pointer to DeferredFileProcessingThread!
Unable to init GMM pwr mgmt context
Unable to init global GTT.
Unable to init stolen memory.
Unable to initialize page cache
Unable to load DRAM parameters
Unable to obtain ring buffer space
Unable to open file!
Unable to queue timer work item
Unable to read entry 0003 in PinConfigOverrideVerbs key
Unable to read entry 0007 in PinConfigOverrideVerbs key
Unable to read entry 0011 in PinConfigOverrideVerbs key
Unable to read registry key %s\%s
Unable to register for Device Interface
Unable to save registers
Unable to setup Save State memory
Unable to setup memory information
Unable to setup segments
Unable to spawn DeferredFileProcessingThread!
Unknown error at graphics address 0x%x
VHAL_UpdateGMMBlockDesc: Unable to Get Active Topology
VIDPOWER.C - Unable to complete init
ValidateCmResourceList FAILED unable to map BAR, error code: %x
VidGetConfig: Unable to get configuration
__GmmAllocBlockWithAddr. Unable to Can't allocate node.
__GmmAllocBlockWithAddr. Unable to allocate specific heap addr.
__GmmAllocCachePages: Unable to allocate PCB for stolen memory
__GmmAllocDummyPage Unable to allocate Blockdesc
__GmmAllocDummyPage: Unable to get one page from OS!
__GmmAllocMdlMemory: Unable to get MDL pages!
__GmmGen4ReleaseSwizzlingRange: Unable to free heap!
__GmmPopulateGttSegment Unable to allocate Blockdesc
__GmmPreGen4_5InitSegmentGttEntries: Unable to get MDL pages!
__GmmPreGen4_5InitSegmentGttEntries: Unable to get dummy page!
__KmCleanupOverlayDownscaleState: Unable to destroy GPU context for overlay downscale
__KmCleanupOverlayDownscaleState: Unable to destroy device for overlay downscale
__KmCreateContextInternal: Unable to allocate KMD GPU Context!
__KmGen3InitNullHwContext: Unable to allocate ring space to send null context
__KmGen3InitRender: Unable to allocate Gen3HwStaticState
__KmGen3InitRender: Unable to allocate tag page
__KmGen3LoadBufferInfo: Unable to get pre-patch address
__KmGen3Present3D: Error initializing DMA block manager.
__KmGen4InitNullHwContext: Unable to allocate ring space to send null context
__KmGen4InitRender: Unable to allocate Gen4GmmBlkSurfaceState
__KmGen4InitRender: Unable to allocate tag page!
__KmGen4InitTimerContext: Unable to get core clock frequency
__KmGen4PagingSpecialLockTransfer: Error reading file
__KmGen4Present3DFinish: Error initializing DMA block manager.
__KmGen4RestartRingBuffer-->
Ring buffer not in stopped state, cannot restart
__KmGen4SetSpecialLockTransferState: Error loading file
__KmGen5InitRender: Unable to allocate PAVP context!
__KmGen5InitRender: Unable to allocate space for dummy page for CTG UnderflowFix!
__KmGen5InitRender: Unable to allocate tag page!
__KmGen5_75InitTimerContext: Unable to get core clock frequency
__KmGen5_75_Present3DFinish: Error initializing DMA block manager.
__KmGen6IdleSpecificEngine: Unable to complete sync flush!
__KmGen6IdleSpecificEngine: Unable to idle ring buffer!
__KmGen6IdleSpecificEngine: Unable to restart ring!
__KmGen6IdleSpecificEngine: Unable to stop ring!
__KmGen6InitBltNode: Unable to initialize blitter node ring buffer!
__KmGen6InitMainNode: Unable to initialize main node ring buffer!
__KmGen6InitNullHwContext: Unable to allocate ring space to send null context
__KmGen6InitRender: Unable to allocate Kernel Buffer!
__KmGen6InitRender: Unable to allocate tag page!
__KmGen6InitRender: Unable to initialize nodes!
__KmGen6InitRender_Gen6: Unable to allocate NULL HW graphics context!
__KmGen6InitTimerContext: Unable to get core clock frequency
__KmGen6InitVideoNode: Unable to initialize video node ring buffer!
__KmGen6InitializeNodes: Unable to initialize Overlay node!
__KmGen6InitializeNodes: Unable to initialize blitter node ring buffer!
__KmGen6InitializeNodes: Unable to initialize main node ring buffer!
__KmGen6InitializeNodes: Unable to initialize video node ring buffer!
__KmGen6PavpConnState: Unable to allocate ring space for key exchange command
__KmGen6PavpKeyExchange: Unable to allocate ring space for key exchange command
__KmGen6PavpSetFreshness: Unable to allocate ring space for key exchange command
__KmGen6PavpSetPlaneEnable: Freeing plane enable failed. Memory leak!!!
__KmGen6PavpSetPlaneEnable: Unable to allocate ring space for plane enable command
__KmGen6PavpTermSessKey: Unable to allocate ring space for key exchange command
__KmGen6RestartRingBuffer-->
Ring buffer not in stopped state, cannot restart
__KmGen7InitNullHwContext: Unable to allocate ring space to send null context
__KmGen7InitRende : Unable to allocate NULL HW graphics context!
__KmGen7InitRender: Unable to allocate tag page!
__KmGen7InitRender: Unable to initialize nodes!
__KmInitOverlayContext: Unable to allocate overlay context
__KmInitPowerState: Unable to allocate power state buffer!
__KmInitRender_Gen6: Unable to allocate graphics context!
__KmInitRender_Gen6: Unable to setup NULL HW context!
__KmInitRender_Gen6: Unable to setup platform specific info!
__KmInitializeOverlayContext: Unable to read overlay disable registry setting
__KmInitializeOverlayContext: Unable to read overlay disable synch registry setting
__KmNotifyGrm: Unable to Save Floating Point State
__KmPavpKeyExchange: Unable to allocate ring space for key exchange command
__KmPavpWriteClearBuffer: Unable to allocate ring space for loading clear buffer into WOPCM
__KmReserveBandwidthForOverlay: Unable to GrmQueryResource
__KmReserveBandwidthForOverlay: Unable to Save Floating Point State
__KmSMInitKernelState: Unable to allocate Kernel Buffer!
__KmSetupHardwareContextMemory: Unable to allocate Render HW context!
__KmSetupHardwareContextMemory: Unable to allocate memory for render context structure
__KmSetupOverlayDownscaleState: Unable to create GPU context for overlay downscale
__KmSetupOverlayDownscaleState: Unable to create device for overlay downscale